Express Bridge
Water Purifier(RO&DI Water)
Water Purifier(RO&DI Water)
Couldn't load pickup availability
Introduction:
Laboratory water purifier is a pure water preparation equipment specially used in laboratories, which converts tap water or other water sources into high-purity water that meets laboratory requirements through a series of physical and chemical processes. These processes include pretreatment, reverse osmosis, ion exchange, ultrafiltration, UV sterilization, etc., to ensure that the quality of the final produced water meets or exceeds the standards required by the laboratory.
Technical Parameters:
|
Model |
SCSJ-I-10L |
SCSJ-II-30L |
|
Water Output Type |
RO&DI water |
|
|
Water Output Speed |
10L/H |
30L/H |
|
Purifying Procedure |
PF+AC+RO+DI |
|
|
Water Supply Requirement |
Tap water: TDS<200ppm, 5~45℃, 1.0～3.5Kgf/cm2 |
|
|
Pre-treatment |
10" PP filter*1+10" activated carbon*2 |
10" PP filter*1+10" active carbon filter*1 |
|
RO Unit |
50 GPD RO membrane*1 |
300 GPD RO membrane*1 |
|
Subsequent Unit |
Deionization purification column*2 | Deionization purification column*1 |
|
Pure Water Quality |
Soluble organic matter: Rejection rate>99%(molecular weight>100) |
|
| Particle: Rejection rate>99% | ||
| Microbe: Rejection rate>99% | ||
| Salt rejection rate: >99% | ||
| TDS (total solids solubility): RO water: 5~20ppm | ||
| Resistivity: 10~18.25MΩ.cm | ||
| PM(particulate matter)(>0.22μm): <1/ml | ||
| Conductivity: 0.055~0.1μs/cm | ||
| Microbe/Germ: <1CFU/ml | ||
|
Water Quality Monitor |
TDS(Total Dissolved Solids) meter | Electrical conductivity tester |
|
Consumption |
46W |
113W |
|
Power Supply |
AC220±10%, 50/60Hz; 110±10%, 60Hz |
|
|
Standard Configuration |
Main body(Include 1 set of cartridges)+TDS meter |
|
|
External Size(W*D*H) |
390*400*503mm |
325*403*650mm |
|
Package Size(W*D*H) |
500*520*650mm |
460*420*1200mm&670*400*260mm |
|
Gross Weight |
27kg |
40kg |
Share
